People
Director
 |
Antoni Ivorra Full Professor, Serra Húnter and ICREA Acadèmia Fellow at the Department of Information and Communication Technologies (DTIC) of Universitat Pompeu Fabra (UPF). Prior to joining UPF in 2010, he enjoyed a four-... |
Post-Doctoral Fellows
 |
Quim Castellví Quim Castellvi studied Electronics Engineering at the Universitat Politècnica de Catalunya, from which he received his diploma in 2009. During the following two years, he took a MSc degree in Biomedical... |
 |
Jesús Minguillón Jesús Minguillón was born in Granada (Spain) in 1990. He received his MSc degree in Telecommunication Engineering in 2014 and his MSc degree in Electrical and Electronic Engineering in 2015, both from the... |
 |
Aracelys García-Moreno Aracelys studied Electronic Engineering at Universidad Simon Bolivar in Caracas, Venezuela and received her diploma in 2005. She participated in the CEMACUBE Erasmus Mundus Programme in 2014. Within this... |
 |
Laura Becerra-Fajardo Laura studied Electronic Engineering at Universidad Nacional de Colombia, holding a PAES scholarship - Best High School Graduates 2002, and received her diploma in 2008. In 2012 she received her diploma of MSc... |
PhD Students
 |
Mario Gómez-Barea Mario graduated in Telecommunications Engineering by Universidad de Granada (Granada, Spain) in 2017. His BSc thesis consisted in the design and implementation of a medical device based on induction heating... |
 |
Masoud Hosseinidoost In 2017, Masoud began his BSc in Cellular and Molecular Biology at Shiraz University in Shiraz, Iran, where he developed a strong interest in Biophysics. This passion led him to pursue a MSc in Biophysics at... |
 |
Burak Altun Burak has a background in Electrical and Electronics Engineering. In the last year of his undergraduate education, he worked on a research project about fabricating microfluidic paper-based analytical devices... |
 |
Ting Shu Ting started her PhD in Information and Communication Technologies at Universitat Pompeu Fabra (UPF) in 2022. Her research is focused on irreversible electroporation (IRE), electrochemical impedance... |
Project Assistant
 |
Ivan Luque Del Toro Ivan studied Biomedical Engineering at Universitat Pompeu Fabra (UPF) and received his diploma in 2023. Despite his past work covering software for automatic detection and assessment of pulmonary embolism from... |
 |
Mar Gadea Mar is a 2023 Biomedical Engineering graduate from Universitat Pompeu Fabra (UPF). Her BSc thesis was the design and development of an in vitro mockup of the pulmonary circulation to test wireless... |
Visiting Scholar
 |
Albert Comerma Albert Comerma studied Tecnical Electronics Engineering at the Universitat Politècnica de Catalunya, followed by Electronics BSc and MSc in Universitat de Barcelona. In 2014 he obtained the PhD diploma with... |
Former Members
 |
Radwan Qasrawi Radwan studied Electronic Engineering at Al-Quds University, Palestine, from which he received his master degree in computer science. He started working in 1999 at the deanship of scientific research at Al-... |
 |
Jaume Banús Jaume studied Biomedical Engineering at the Universitat Pompeu Fabra, he started to collaborate with BERG at the beginning of 2014 working in his end-of-degree project and received his diploma in 2015. Since... |
 |
Alvaro Jansà Alvaro Jansà studied Human Biology at the Universitat Pompeu Fabra, from which he received his diploma in 2012. After this, he took a MSc degree in Pharmaceutical and Biotechnology Industry. He worked... |
 |
Cristina Borda Cristina was a postdoctoral fellow working at the ERC project “Electronic AXONs: wireless microstimulators based on electronic rectification of epidermically applied currents” in the Biomedical Electronics... |
 |
Nina Klein Nina studied biophysics at the Goethe-University Frankfurt, Germany. After receiving her diploma of MSc in Biophysics in 2015, she started working as a scientific advisor at the Institut für Bildgebende... |
 |
Jaume Millán Jaume Millán presented his final degree project for the Universitat Politècnica de Catalunya in Biomedical engineering on October 2020. He was part of the fabrication laboratory in the EEBE campus. There... |
 |
Guillem Arias Guillem studied Biomedical Engineering at Universitat Pompeu Fabra (UPF), where he started to collaborate with BERG for the project “Fast flow-through non-thermal pasteurization using constant radiofrequency... |
 |
Borja Mercadal Borja studied physics at the Universitat de Barcelona, and received his diploma in 2012. Then he took a two year MSc degree in biomedical engineering at Universitat de Barcelona and Universitat Politècnica de... |
 |
Javier Aguirre Javier received his B.Sc. and M.Sc. in Physics from the University of Zaragoza (UZ), in 2011 and 2012, respectively. He received his PhD in Physics from the UZ, in 2017, with a Thesis about CMOS design for... |
 |
Enric Perera Enric studied Biomedical Engineering at Universitat Politècnica de Catalunya, and received his diploma in 2016. The following year he took a Msc in Computational Biomedical Engineering at Universitat Pompeu... |
 |
Nerea Alvarez de Eulate Nerea is a current undergraduate student of biomedical engineering degree at Universitat Pompeu Fabra (UPF), where she started as an internship student with BERG for the project “electronic AXONs: wireless... |
 |
Jarold González On March 2011, Jarold A. Gonzalez finished both Telecommunication and Electronics Engineering degrees at the Universitat Politècnica de Catalunya. Afterwards he joined BERG at the Universitat Pompeu Fabra in... |
 |
Louis Silve Louis studied engineering at the Ecole Centrale de Lyon in France. After a first internship in the robotic field, in Jaunary 2015 he came to Universitat Pompeu Fabra for a three months internship in the... |
 |
Marc Tudela Marc studied Electronic Engineering at Universistat Politècnica de Catalunya, and received his diploma in 2013. From February 2014 to July 2017 he was working as a power electronics engineer in Cinergia. Since... |
 |
Jake Phillips Jake received his B.Sc. In Biomedical Engineering from Purdue University in 2015 where he developed a keen interest in neuroprosthetics and electrophysiological sensing technologies. From January 2015 to... |
 |
Shahid Malik Shahid Malik was born in Rajasthan, India, in 1992. He received a master’s degree from Jamia Millia Islamia University, New Delhi, India, with a specialization in control and instrumentation systems in 2014... |
 |
Emma Aoustin Emma is currently a french engineering student at Institut d'Optique Graduate School in Paris, graduating in 2023. Although she focused on the field of optics and photonics during her master's degree, she is... |
 |
Albert Ruiz-Vargas Albert graduated in Electronics and Industrial Engineering (majoring in mechanical engineering) at the Universitat Politècnica de Catalunya in 2008 and 2010, respectively. During his studies he participated in... |
 |
Marieluise Schmidbauer Marieluise studied Electrical Engineering at the Technical University of Munich and graduated in 2013. In the same year she started to study her master's degree in Electrical Engineering at the Technical... |
 |
Ana González Suárez Juan de la Cierva Postdoctoral Fellow at the Department of Information and Communication Technologies (DTIC) of the Universitat Pompeu Fabra (UPF) from May 2017. Prior to joining the UPF, she was Postdoctoral... |
 |
Ahmed Eladly Ahmed earned his B.Sc. in pharmacy from Alexandria University in 2012 and an M.Sc. in bioengineering from the School of Mechanical and Materials Engineering at UCD in Dublin in 2015. In 2021, he completed a... |
 |
Tomás García-Sánchez Tomás García-Sánchez obtained his degree in Telecommunication Engineering in 2010 from the Universitat Politècnica de València (UPV) and his M.Sc. in Biomedical Engineering in 2010 from a consortium between... |
 |
Anna Comas Anna is a Biomedical Engineer graduated in 2022 at Universitat Pompeu Fabra (UPF). Despite having focused on the field of synthetic biology and microbiology for her bachelor thesis, she is also interested in... |